Four details to pay attention to when using a DC blower_Industry News_News

Industry News: Company News

Industry News

Knowledge

hot

contact

Four details to pay attention to when using a DC blower

Time：2022-05-19Views：0

There are many types of cooling fans in today's society, and they are widely used in all walks of life. The problems that need to be paid attention to when using each type of cooling fan are different. So what problems should be paid attention to when using the DC blower? The following Xiaobian Yi Rongchuan will introduce to you the matters needing attention in the process of using the DC blower.

1. Regularly clean the DC blower to improve the working environment of the DC blower. Regularly and quantitatively supply special dust collectors for blowers to strengthen dust removal operation management, improve dust removal efficiency, and avoid impeller damage accidents.

2. During the use of the blower, the sensitivity of the thermometer and the oil indicator should be regularly checked, the quality of maintenance should be strictly controlled, and the hidden danger of accidents should be eliminated in the bud. The overhaul should be comprehensive and thorough. Carefully inspect the impeller for wear, the balance of the main shaft and the impeller, the looseness and collision of the internal connections, the flexibility of the inlet flapper switch, and the lubrication and cooling of the bearings.

3. Strengthen operation management and prohibit illegal operations. There should be strict operating rules for the start and operation of the DC blower. If it is necessary to start the induced draft fan with no load, it is strictly forbidden to start it with load. If the startup time is too long, the fan motor is prone to overheating and may be overloaded and burned;

4. Reinforced surface to improve the wear resistance of the blade. Most of the time, accidents such as fan output drop, vibration, and blade breakage are prone to occur. Therefore, the working surface or severely worn parts of the blade should be covered to improve the wear resistance of the blade. Practice has proved that the wear resistance of the blade after surfacing treatment is greatly improved, which not only changes the frequent wear of the impeller fan, but also lays a good foundation for the safe operation of the fan.

The above four points are the points that need to be paid attention to in the process of using the blower. I hope you will strictly abide by the rules and regulations.

Previous Back to list Next

news center

200x200x60mm Industrial Strong Air Ventilation Fans Cooling Elctric axial flow DC fans

Four details to pay attention to when using a DC blower